Meditech Europe Multiwave Oscillator Manual De Usuario página 2

User Manual MWO (standard + case)
Unpack the MWO carefully.
Postion it on a calm spot with enough fresh air. Connect the power plug to
the wall socket.
Pull the power switch up. You will hear the ventilators start working
immediately.
Now connect the features you ordered with the MWO (Lakhovsky Antennas,
Printplate Antenna, the Pillows or the Argon Therapy lamp).
Now, please turn the timer switch to the number of minutes you want the
treatment to last. Then turn the Fine Tuning knob to the right, until you hear
and feel the "click" .
Attention !! Important !!
Then start turning the Pulse Strenght slowly to the right. First you will not
hear anything, but at a certain moment you will hear a soft "rattle" . The more
you turn the Pulse Strenght, the stronger the noise will be.
Our advise is to not turn this Pulse Strenght knob too far. The noise you hear
should be calm and relaxed, not stressed and loud.
Attention !! Important !!
NEVER TURN THIS PULSE STRENGHT KNOB TO THE LEFT !! ONLY
CLOCKWISE !!
If you have found the correct noise you can adjust the therapy with the Fine
Tuning, by slowly turning this knob a little further to the right, or back, to the
left.
Attention: Do not use MWO with a pacemaker.
You can now start the relaxation !
We wish you good luck!
Manufacturer: Meditech Europe BV
Daalder 14
8305 BE Emmeloord
Holland