memorex MD6460 Guia Del Usuario página 13

TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
1
With a CD
PLAY/PAUSE (®p)/POWER ON button 1
to turn the unit on and press the STOP
(I)/POWER OFF button 2 to stop auto
playback. Press the PROG button 3; the
Track (00), program number (P-01) and
PROG indicator will appear in the CD
display.
3
Press the
( )/POWER ON button ‚ to begin
®p
Programmed playback and adjust the
VOLUME control ƒ and DBBS switch
„ as desired.
NOTES:
• Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program, press and hold the PROG button while in
the Stop mode until the PROG indicator disappears in the display.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
CD OPERATION (CONTINUED)
1
2
inserted, press
1
2
3
PLAY/PAUSE
2
Select the first track to be played back
the
using the SKIP/SEARCH o 1 or n
button, then press the PROG button „
again. Repeat this step to program
additional tracks up to a maximum of 24
tracks.
4
To skip forward or backward through
the programs, press the SKIP/
SEARCH o 1 or n ƒ button. When
the disc is through playing, it will stop.
12
1
2
1
2
ƒ