ASROCK FM2A78 Pro4+ Manual Del Usuario página 22

2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA3_1: see p.2, No. 11)
(SATA3_2: see p.2, No. 10)
(SATA3_3: see p.2, No. 12)
(SATA3_4: see p.2, No. 9)
(SATA3_5: see p.2, No. 13)
USB 2.0 Headers
(9-pin USB_11_12)
(see p.2 No. 21)
(9-pin USB_13_14)
(see p.2 No. 20)
USB 3.0 Header
(19-pin USB3_9_10)
(see p.2, No. 8)
22
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
SATA3_5
USB_PWR
P-12
P+12
1
P+11
P-11
USB_PWR
USB_PWR
P-14
P+14
1
P+13
P-13
USB_PWR
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
1
These five Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. The current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Besides six default USB 2.0
ports on the I/O panel, there
GND
DUMMY
are two USB 2.0 headers on
this motherboard. Each USB 2.0
GND
header can support two USB
2.0 ports.
GND
DUMMY
GND
Besides two default USB 3.0
Vbus Vbus
ports on the I/O panel, there is
IntA_PB_SSRX-
IntA_PB_SSRX+
one USB 3.0 header on this
GND
IntA_PB_SSTX-
motherboard. This USB 3.0
IntA_PB_SSTX+
header can support two USB 3.0
GND
IntA_PB_D-
ports.
IntA_PB_D+
Dummy