Installation Instruction; Wiring Diagram; Installation Diagram - GARZA 400611 Guia Del Usuario

INSTALLATION INSTRUCTION

1. Install the thermostat vertically in the reference room,
approximately 1 .5m above the floor, so that enough air can pass
through and accurately measure the temperature of the room.
Install the thermostat in a place that does not receive direct
sunlight, and far enough away from any cooking utensils, or other
apparatus that can generate heat.
2. Remove the temperature adjustment knob; loosen the screw in
the housing, and then remove the housing according to the

installation diagram.

3. Fix the base in the connection box with the screws.
4. Pass the connection cables through the square hole in the base.
Connect the wires to the terminals according to the connection
diagram inside the cover, and once done, replace and tighten the
cover. For more details, please see the diagram below.

WIRING DIAGRAM

Termostato
Termóstato
Thermostat
INSTALLATION DIAGRAM
!0(3)A
220--21ov
50/60111: