DASH MOUNT
1. Clean the dash surface with supplied cleaning wipe (A).
Note: Wipe may cause discoloration of certain plastics,
vinyls and painted surfaces. It is recommended to test in
an inconspicuous area first.
2. Peel the adhesive backing from the bottom of the mounting
base (B), and place in position (C). Apply firm pressure.
� - - -
PlACING Y�U� DEVICE:� '
THE MAGICMOUNT
When placrng your devrce on the
magnetrc mount, alrgn the top & bottom
magnetic surfaces on the back of your
device with the top & bottom magnetic areas on the mount.
�-
[)· =
™
CHARGE
6