AmazonBasics B07CGQY67K Manual Del Usuario página 5

Installation
Step 6:
• Push the cover back up until it clicks into place.
Step 7:
• Run water from the dispenser for 5 minutes at 0.5 gpm (about 2.5 gallons) to clear the system
and prevent sputtering.
NOTE: Initial flow rate may be slower than expected. Full flow rate should be restored within
24-36 hours.
Step 8:
• Check filter for any leaks. If leaks are detected, uninstall and reinstall the filter as instructed
above.
CLICK
5