Infiniton GWN-12NG Manual De Usuario página 38

●The gas water heater installed in a suitably ventiled room , in accordance with the regulations in
force.. It is not allowed to install in the bedroom, underground, bathroom or any other places
with poor ventilation.(For B B type)
23， 53
● The flue of the heater cannot be connected to a common flue (Fig. 4).
● Please don't install the heater in places where special chemicals are used, such as the laundries
or factories etc., otherwise it may cause rusting, shorten the lifetime of the heater, or prevent
normal working.(Fig. 5)
● Don't install the heater above the gas stoves or other heat sources. (Fig. 6)
● The gas water heater should be kept away from the combustible materials with the distance
shown in Fig. 7 at least.
● When the installation parts' materials are combustible or flammable should be used
frame-proof board to isolate,heat-resistant plate and wall gap should be greater than 10mm,and
the size of heat plate should be larger than water heater shell for 10mm. (Fig. 8)
Fig. 7 Fig. 8
● The electric wires and electric equipment are not allowed to be placed on the top of the gas
water heater. The horizontal distance between the gas water heater and other electric equipment
should be more than 400mm.
● The power socket must have a reliable ground wire to improve safety. In order to reduce the
number of times of plugging, it is better to use a socket with a switch. Whenever the water
heater finishes working, please switch it off to avoid being electrified in a long term. The power
supply socket should not be installed in the moist environment.
● The socket should be installed at the side of the product, and never be installed below the
machine or the place with splashes, near the heat source, in exposure to sun and rain, or the
place where it is not easy to control.
● The installation place of socket must be far away from the spraying space, so as to avoid
16