Programmable Computer Interface + ActiveHome Pro
DIMMER / APPLIANCE MODULE*
Technical data CM15Pro
Power:
230 VAC 50 Hz, 7 Watt
Backup battery:
1x 9V alkaline block battery
Backup time:
1 week
Supply current :
<30 mA
X-10 Powerline:
120 kHz ± 2 kHz / 2.5 Vpk-pk
Signal sensitivity:
15 mVpp min, 50 mVpp max at 120 kHz
Signal / noise ratio:
1,35 : 1
X-10 transmission:
1 pulse burst at 0, 60 and 120 degrees.
X-10 Key codes it can transmit: All units Off, All Lights On, On, Off, Dim,
Bright, All Lights Off, Extended Code 1 type 0,
Extended Code 1 type 3, Hail Acknowledge,
Pre-Set Dim, Status Request, RF commands
X-10 Key codes to respond to: All units Off, All Lights On, On, Off, Dim,
Bright, All Lights Off, Extended Code 1 type 3,
Hail Request, Pre-Set Dim, Status Request,
RF commands
X-10 Collision detection:
Present
Input impedance:
> 180 Ohm (P-N) at 120 kHz
RF Range:
30 meters (note: the unit should be mounted
at a height of 1metre for best performance
and located away from any sources of RF
interference such as computers, monitors, etc).
RF Power:
10 mW (maximum)
RF receiver frequency:
433,92 MHz
RF transmitter frequency:
433,92 MHz
Ambient temperature:
-10°C to +50°C (operation) -20°C to +70°C (storage)
Dimensions (mm):
66.7 (w) x 113.5 (L) x 45.3 (H)
Order information
CM15Pro™
EU version
UK version
Giftbox
Size (LxWxH)
System requirements
Windows based Personal Computer
Available USB port
CD ROM or DVD player
Windows XP or Windows Vista operating system
www.marmitek.com
© M A R M I T E K
REMOTE CONTROL*
Art.nr. 9793
Art.nr. 9800
180x74x144mm
™
Software
CM15Pro COMPUTER INTERFACE
Set includes
1x
CM15Pro™
Programmable
Computer Interface
(9V battery included)
1x
USB cable
1x
Quick intallation manual
2 metre
English, Deutsch, Français,
Español, Italiano, Nederlands.
Also available
SC9000 Security Console
to integrate your Home Automation
with your security system.
BE:09599 - DE:09597 - EU:09584
FR:09598 - NL:09596 - UK:09600
LM12 Lamp/Dimmer Module
to switch or dim lights with your
computer interface. G: 08910 - U:08977
I:09051 - F:08911 - CH:09248
AW12 MicroModule
to make your Home Automation system
invisible. Art.nr. 09463
PC*
1x
Marmitek X-10 ActiveHomePro™ Software
English
MS13 Wireless motion sensor
to activate your Home Automation by
motion detection. Art.nr 09053
AM12 Appliance / Switch Module
to switch appliances with your
computer interface. G:08915 - U:08978
I:09052 - F:08916 - CH:09249
LW11 Wall Mounted Dimmer
to make your Home Automation system
invisible. EU: 08930
2 2 7 3 4 / 2 0 0 8 0 1 0 7
* not included