ASROCK X399M Taichi Manual Del Usuario página 32

BIOS Flashback Button
(BIOS_FB1)
(see p.3, No. 17)
To use USB BIOS Flashback function, press the BIOS Flashback Button for three seconds. Please
follow the steps below.
1. Download the latest BIOS file from ASRock's website : http://www.asrock.com.
2. Copy the BIOS file to your USB flash drive.Please make sure the file system of
your USB flash drive must be FAT32.
3. Extract BIOS file from the zip file.
4. Rename the file to "creative.rom" and save it to the root directory of X: USB flash drive.
5. Install PSU and turn it on.
*Do not boot the system.
6. Then plug your USB drive to the USB BIOS Flashback port.
7. Press the BIOS Flashback Button for about three seconds. Then the LED starts to
blink.
8. Wait until the LED stops blinking, indicating that BIOS flashing has been completed.
*If the LED light turns solid green, this means that the BIOS Flashback is not
operating properly.
BIOS Flashback Button allows users
to flash the BIOS.
USB BIOS Flashback port
X399M Taichi
29