ASROCK Z170 Extreme6+ Manual Del Usuario página 27

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 21)
Serial ATA3 Connectors
(SATA3_0_4:
see p.1, No. 15)
(SATA3_1_5:
see p.1, No. 16)
(SATA3_2_3:
see p.1, No. 14)
(SATA3_A0_A1:
see p.1, No. 13)
Serial ATA Express
Connectors
(SATA_EXP_0_1:
see p.1, No. 17)
Z170 Extreme6+ / Z170 Extreme6
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
+5V the chassis speaker to this
header.
1
PLED+
PLED+
PLED-
hese eight SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. he SATA3_0,
SATA3_1 are shared with
the SATA_EXP_0. he
SATA3_4, SATA3_5 are
shared with the SATA_
EXP_1.
To minimize the boot
time, use Intel® Z170
SATA ports (SATA3_0)
for your bootable devices.
Please connect either
SATA or PCIe storage
devices to these
connectors. he upper
SATA Express Connector
(SATA_EXP_0) is shared
with the SATA3_0,
SATA3_1 and the Ultra
M.2 Socket (M2_1).
25