Zagg Mobile Charging Station Instrucciones página 2

INTRODUCTION
Congratulations on owning the ZAGG Mobile Charging Station. With its 5000mAh
battery, you can stay connected to your world by quickly and conveniently
charging your Apple Watch and other devices — anywhere. To get the most from
your Mobile Charging Station, read and follow these instructions. Also, keep them
in a safe place for future reference.
STORING YOUR APPLE MAGNETIC CHARGING CABLE
Storing your Apple Magnetic Charging Cable is easy, but to get the most from your
Mobile Charging Station, it's important you store it correctly. Here's the best way:
1. Use the grooves on the sides of the Mobile Charging
Station's protective cover to lift and remove it.
2. Plug the USB end of your Apple Magnetic Charging
cable into the Mobile Charging Station's left USB
port – the one marked with a watch icon.
3. Starting on the left side of the storage island, wrap
your cable counter-clockwise around the island.
NOTE: Don't pull your cable tight as you wrap it, but
keep it snug.
4. As you near the end of your cable, pass the
magnetic charging disc to the left of its storage dish.
While holding the end of your cable to the left, place
the magnetic disc into its storage dish.
5. Press the storage dish flat.
6. Starting at the top, replace the Mobile Charging
Station's protective cover by lowering the charging
cable cutout over the storage dish (this is to ensure
the tab on the storage dish doesn't interfere with
closing the case). Next, lower the rest of the case
onto the base. Press firmly around the edges to
ensure the cover is secure.
1
Storage dish
2nd
1st