Tape Operation; General Operation - Blaupunkt BLP8100-001 Manual Del Usuario

GENERAL OPERATION

PAUSE
▌ ▌
■
STOP/EJECT
FORWARD◄ ◄
FAST
REWIND► ►
►
PLAY
PLAYBACK
1 . Press the "FUNCTION" button to select "TAPE" mode.
2 . Press the "STOP / EJECT" button to open the cassette door and insert your tape.
3 . Close the cassette door.
4 . Press the "PLAY" button to start playing tape.
5 . Press the "VOL+" or "VOL-" button to the desired volume level.
6 . Press the "PAUSE" button when you want to stop playing tape operation temporarily.
Press the "STOP / EJECT" button when finished.
OTHER FEATURES
AUX-IN
1 . Connect 3.5 mm cable to this unit and your device with 3.5 mm output jack.
2 . Press the "FUNCTION" button to select "AUX" mode.
3 . Press play on your device and enjoy.
Remark: 3.5 mm Aux-in cable not include
PHONES
Connect the 3.5mm headphones. Press the volume button to adjust the sound level of the PHONES jack.
CLOCK SET
Clock set must be at standby mode.
1 . Press and hold the "CLOCK" button 2 seconds, the LCD will show "24H" and flashing
2 . Press the "SKIP+" or "SKIP-" button to select "12H" or "24H", press the "CLOCK" button to confirm.
3 . Adjust the hour by press the "SKIP+" or "SKIP-" button and then press the "CLOCK" button to confirm.
Adjust the minute by press the "SKIP+" or "SKIP-" button and then press the "CLOCK" button to confirm.
EQ
EQ type: ROCK-POP-CLASSIC-JAZZ-FLAT
Press and hold the "EQ" button 2 seconds to choose the correct setting.
SLEEP
Sleep type: 120, 90, 60, 45, 30, 15, OFF
Press and hold the "SLEEP" button 2 seconds to enter SLEEP setting.
Press the "SLEEP" button again to choose the correct setting.
Press to stop playing tape operation temporarily.
Press again to resume tape operation.
Press to stop tape operations.
Press again to open the cassette door after the tape spools stop turning.
& Press to start rapid tape winding either forward or reverse direction.
Press to start playing tape.

TAPE OPERATION