Notice; Instructions - J.P. SELECTA 2101520 Manual De Instrucciones

1.5

Notice

1、Only GSM network SIM card is available.
2、Ensure that the SIM card is of certain amount of money for the text message fee.
3、The data logger must be supported by External Adapter—DC 9V and turn on the alarm function to
activate the alarm message system, otherwise it cannot send the message successfully.
1.6

Instructions

1. Be sure that the battery is installed, external power connected and SIM card insert well before you turn
on the data logger.
2. Install the software and connect the data logger with PC via USB connection cable.
3. Run the software and click the "connect" button. The factory communication settings between the PC
software and the data logger are already used to communicate the two devices. If necessary, modify the
parameters of the PC software to adjust.
4. Click【setup】and set the high and low limits as well as the log interval. The name of the data logger
should be in English and no illegal symbol. (Notice: Data logger will send alarm message when setting
limits are exceeded and the data logger record the data. Suggest set log interval above 60 seconds.)
5. Click【Options>GSM】in the tool bar and set the mobile phone number. It can set 3 numbers in total.