Uthlusty TENS Manual Del Usuario página 9

https://uthlusty.co.uk
Troubleshooting
Problem Cause
Adhesive gel
During the
pads are not
massage, the
adhering firmly
skin feels a
to the skin. Or
painful burning
the gel pads are
sensation or
too dry.
the stimulation
becomes
weakened.
Unit is on, but Both pads are
not firmly on the
no sensation is
felt in the pads. skin. Or there is
a loose
connection. Or
the intensity
level needs to
be increased.
support@uthlusty.co.uk
Solution
Apply a few
drops of water
to adhesive
surface of each
pad and make
sure the pads
are pressed
firmly to the skin
during
application.
When you use
two pads(one
channel) or four
pads(two
channels) at the
same time,
make sure you
have placed all
the pads on
your body,
otherwise it
won't work.
Increase the
intensity
14
https://uthlusty.co.uk
Adhesive gel Adhesive gel
pads do not pads need to be
stick to skin replaced.
even after
cleaning and
moistening the
gel pad.
Unit does not Battery is low.
turn on or the
screen is dim.
Does not Not using it
provide long enough.
adequate pain Not lying down
relief. then massaging
neck.
support@uthlusty.co.uk
Replace the set
of pads. Pads
can be
purchased from
local distributor.
Recharge the
battery.
Use your
massager 20-30
minutes at a
time, 3-6 times
per day. Lie on
your back for
neck support
when you need
relief for
headaches.
15