LF Holiday Living 745531-203 Manual Del Usuario página 4

f） ） ） ） RISK OF FIRE. Do not replace attachment plug. Contains a safety device （fuse）that should
not be removed. Discard product if the attachment plug is damaged.
Replace the lamp
1. Grasp plug and remove from the receptacle or other outlet device. Do not
unplug by pulling on cord.
2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with only 3.6 Volt, 0.072 Watt (warm white LED ) type lamp (provided with
product).
If the new lamp base does not fit in lampholder, follow the steps below before step 3. NOTE: Be
careful when exchanging the lamp base on the new lamp with the old one or the LED wires may
break if leads are bent too many times.
a) Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b) Thread leads of new lamp through holes in old base with one lead in each hole.
c) After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that
the leads will not touch the contacts inside the lampholder.
CAUTION
1. To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.6 Volt 0.072 Watt.
2. To reduce the risk of fire and electric shock: a) Do not install on trees having needles, leaves or
branch coverings of metal or materials which look like metal, b) Do not mount or support
strings in a manner that can cut or damage wire insulation.
3. Risk of fire. This product does not contain lamp shunts, which allow the product to operate if
one lamp burns out. Replace lamps only with the spare lamps provided with this product.
120 Volt. 60 Hz. AC , 0.04A , 4.8 Watts, MADE IN CHINA
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes
No Tools Required for Assembly
4