Installation - Dimplex Revillusion RLG20 EU Manual De Instrucciones

Installation

The Revillusion Log Set offers an alternative to wood or gas fireplaces. It can give
your existing fireplace new life or transform an existing faux surround or alcove
into a stunning focal point.
Specifications
Electrical
Volts: 230-240V AC, 50Hz
Watts: 1300W
Wiring: Plug-In
Bulb Type: LED
Dimensions
Width: 603 mm
Height: 482 mm
Depth: 317 mm
Weight: 5.0 kg
WARNING: Electrical outlet wiring
must comply with local building codes and
other applicable regulations to reduce
the risk of fire, electric shock, or injury to
persons.
6
Placement
1.
The Revillusion log set does not
require any special venting. Install
the unit in an opening with the
minimum dimensions:
A. 610 mm wide,
B. 559 mm high
C. 356 mm deep.
2.
Make sure there is clearance for air
circulation beneath the unit.
3.
If installing in an existing fireplace
opening, close the chimney with
a suitable device to prevent any
chimney debris from falling onto the
unit.
Do not install into an existing
fireplace opening that is prone to
dampness.
GB
B
C
A
www.dimplex.com