General Characteristics; Safety Warnings - IGNIA LIGHT IRIS Manual De Instalación Y Mantenimiento

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-
plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
1. VERIFY THE CONTENTS OF THE PACKING:
• Iris Luminaire (I2803)
• Bag with anchor screws
• Instruction manual

2. GENERAL CHARACTERISTICS:

Luminaire to be installed in exteriors and interiors.
It is a Class I electrical device (230 V ~ 50-60 Hz) with an IP67 degree of protection and complies with EN 60598-1.
The manufacturer shall not be responsible for the assembly, installation or commissioning of any manipulation or
incorporation of electrical components that have not been carried out in its installations.
3. ASSEMBLY:
The people who are in charge of the assembly must possess the qualification required for this type of work.
During the installation avoid contact with the electric voltage.
The rules for accident prevention must be observed.
Luminaire not suitable for covering with thermal insulating material.
Electrical connection with 2 poles cable + Earth.
4. MAINTENANCE:
The luminaire does not need any maintenance, if it detects that the luminaire does not work properly please contact
with your installer.
Clean the surface of the luminaire with a cloth dampened with water and neutral soap, do not use abrasive products.

5. SAFETY WARNINGS:

• Do not stare directly into the luminaire when it is on. This could damage the eyes.
• People will assemble must possess the necessary qualifications for such jobs.
• Avoid making contact with electric voltage.
• Comply with the current standards regarding accident prevention.
• In this regard, the IEC-364-7-714 standard must be observed: ELECTRICAL INSTALLATIONS OF BUILDINGS.
OUTDOOR LIGHTING INSTALLATIONS.
• All service must be performed with the fitting disconnected from the network.
• The manufacturer in any way responsible for the assembly, installation or operation of any manipulation or addi-
tion of electrical components that have not been conducted on the premises.
3