Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
WIRELESS MODE
1. Rotate the volume knob to turn "ON" the speaker.
You will see the blue LED indicator light flashing and hear a notification sound.
2. Use your wireless device to connect and pair to:BT808
If need, the password is "0000".
You will see the blue LED indicator light and hear a notification sound.
3.
You can now play music through the speaker.
4.
If disconnected, your wireless device will connect automatically to this speaker again.
LINE IN MODE
1.
To connect the speaker by stereo cable. The speaker will enter into "Line In" mode.
You will hear a notification sound, then use your device to play music.
2. It will be in "AUX" mode and you will see the blue LED indicator light.
CHARGING
1.
Plug the end of the included USB cable into the speaker USB port and plug the other end into a
USB 5V port on your computer or other USB charging.
2. The indicator light will show red while charging and turn off once the charge is complete.
LOW POWER PROTECTION
When battery power is low, there is warning sound, unless charged you will hear another notification
sound and the speaker will turn "OFF".
VOLUME CONTROL
When power is "ON" the default sound is at MAXIMUM, rotate the volume knob to adjust the sound level.
PLAY MODE: BT LINE
MTCSOUNDBAR2
MTCSOUNDBAR2 WIRELESS SOUNDBAR
Output Power:
Product Type:
Bluetooth Version:
Working Time:
Operating Range:
Unit Size :
Impedance:
Battery:
Charging Time :
Power Supply:
Frequency Response:
10W 2
Bluetooth Speaker
V4.2
About 12 Hours
10M
52mm 2
4 Ohm
3.7V/4500mAh
About 6 Hours
DC 5V/1A
150Hz-20KHz
2
08/10/19
Publicidad
