Troubleshooting - JBL DUET 200 Manual Del Usuario

SPECIFICATIONS
™
JBL DUET 200
Power: 10W (2 x 5 Watts) @ <1%THD, 1kHz
Frequency Response: 75Hz – 20kHz
Power Consumption: 21.5W maximum
Power Input: 18V/1.2A
™
JBL Duet 200 Transducer: 1-3/8" (35mm) x 2
(full range per channel)
Dimensions: 14-1/8" x 4-5/16" x 2-1/2"
(W x D x H) (359mm x 110mm x 64mm)
Weight: 1.5 lb (0.7kg)
DO NOT DISPOSE OF ELECTRICAL APPLI-
ANCES AS UNSORTED MUNICIPAL WASTE;
USE SEPARATE COLLECTION FACILITIES.
Contact your local government for information
regarding the collection systems available. If
electrical appliances are disposed of in landfills
or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.

TROUBLESHOOTING

Symptom Possible Problem
No sound from the No power to the system.
™
JBL Duet 200 speaker Power adapter plug is not inserted
system correctly
No volume or low volume
Input source is low
No power; green LED Wall adapter is not plugged into
is not on the JBL Duet
correctly
Wall adapter is not receiving
AC power
Solution
Ensure that the power supply is connected to a live power
source and is properly connected to JBL Duet
(Note: When the JBL Duet 200 system is powered,
a green power LED should light up.)
Touch the volume "Up" (+) pad on the volume control
to unmute and/or increase the system volume level.
(Note: Touching the volume "Down" [–] pad lowers the
system volume; touching both the [+] and [–] volume
control pads at the same time will mute the system.)
Increase the volume level on the audio source device.
Check the connection of the wall adapter.
200 system
™
Place the wall adapter in a known powered outlet;
test the outlet with a lamp or other device.
Connect the JBL Duet
source; test the audio source with headphones.
200.
™
™ 200 system to a known audio
WWW.JBL.COM 5