Using Audio Input; Connecting A Microphone; Avc/Echo/Balance Function - auna StarMaker 2.0 Manual De Instrucciones

EN
20
previous of your external BT device to play the next / previous music.
8. To disconnect your external BT device or press POWER ON/OFF button
to turn off your Karaoke System for stop playing.

USING AUDIO INPUT

1. Press POWER ON/OFF switch to turn on the Karaoke System.
2. Plug a 3.5 mm audio input cable (cable not included) into the LINE IN
JACK and connect the other end to your external audio device.
3. Turn on and play your external audio device.
Your Karaoke System will be automatically played on your external audio
device.

CONNECTING A MICROPHONE

Require a microphone (one microphone included).
1. Plug the microphone into the MIC 1 INPUT or MIC 2 INPUT.
2. Slide Microphone ON /OFF switch to on position.
3. Press the POWER ON/OFF button to turn on Karaoke system
4. Use MASTER VOLUME CONTROL / MICROPHONE VOLUME CONTROL
of your Karaoke system to adjust microphone sound level.

AVC/ECHO/BALANCE FUNCTION

AVC
Turn on your Karaoke system and connect microphone. Adjust the AVC
(Automatic Voice Control) button to adjust the volume of the unit to
compensate for varying levels of volume from the connected microphone.
Turn the dial to adjust the degree to which the Automatic Voice Control
compensates for variations in volume.
Echo
Turn on your Karaoke system and connect microphone. Rotate ECHO knob
to adjust your Karaoke system to enhance your voice for a concert hall
effect.