Installation; Preparing For Installation - Glacier bay 67070-4004 Guía De Instalación Y Cuidado

Installation

1

Preparing for installation

CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
□
Before installation, remove the quick connector
(E) from the free end of the hose by unscrewing
it in a counterclockwise direction.
□
Unscrew the nut (D), and remove the
washers (B & C).
A
C
B
D
E
2
Installing the faucet assembly
□
Retract the hose (1) up through the faucet body
until the hose tting is ush with the bottom of
shank (2). Do not pull the hose tting past the
shank.
□
Insert the faucet assembly (A) through the hole
in the sink.
NOTE: Do not feed the hose (1) back down through the
spout until step 4.
4
A
2
1