Care And Maintenance; Troubleshooting - Kobalt KPS 124B-03 Manual De Instrucciones

OPERATING INSTRUCTIONS
NOTE:
• Charging time is dependent upon the device.
• The power source may warm with several continuous cycles;
this is part of the normal operation of the power source. Always
use the power source in a well-ventilated area.

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified
technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery
from the power source. For safe and proper operation, always keep
the power source clean. Always use only a soft, dry cloth to clean
the power source, never use detergent or alcohol.

TROUBLESHOOTING

WARNING
• Remove battery from the power source before performing
troubleshooting procedures.
PROBLEM
The power
source does
not work.
POSSIBLE CAUSE
1. Low battery capacity.
2. The device draws
more than the rated
output of the ports.
CORRECTIVE ACTION
1. Charge the battery.
2. Remove the device
and turn the power
source on again.
11