Assembly - FISCHER Darex 714005 Instrucciones

EN
Intended Use
The measuring tool is intended for determining and checking horizontal and vertical
lines and plumb points. The measuring tool is suitable for indoor and outdoor use.
Safety Instructions
Warning! If operating or adjustment devices other than those specified here
f
are used or other procedures are carried out, this can lead to dangerous
exposure to radiation.
The measuring tool is delivered with a laser warning sign (marked in the
f
illustration of the measuring tool on the graphics page).
If the text of the laser warning label is not in your national language, stick the
f
provided warning label in your national language over it before operating
for the first time.
Do not direct the laser beam at persons or animals and do not stare into the
f
direct or reflected laser beam yourself. You could blind somebody, cause
accidents or damage your eyes.
If laser radiation hits your eye, you must close your eyes and immediately
f
turn your head away from the beam.
Do not make any modifications to the laser equipment.
f
Do not use the laser goggles as protective goggles. The laser goggles make the
f
laser beam easier to see; they do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while driving. The laser goggles
f
do not provide full UV protection and impair your ability to see colours.
Have the measuring tool serviced only by a qualified specialist using only
f
original replacement parts. This will ensure that the safety of the measuring
tool is maintained.
Do not let children use the laser measuring tool unsupervised. They could
f
accidentally dazzle someone.
Do not use the measuring tool in explosive atmospheres which contain
f
flammable liquids, gases or dust. Sparks may be produced inside the
measuring tool, which can ignite dust or fumes.
Keep the measuring tool away from cardiac pacemakers. The magnet inside
f
the measuring tool generates a field that can impair the function of cardiac
pacemakers.
Keep the measuring tool away from magnetic data carriers and
f
magnetically sensitive equipment. The effect of the magnet can
lead to irreversible data loss.

3. ASSEMBLY

Inserting/Changing the batteries
It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
36