Do not Iron.
Do not dry clean
STORAGE
Allow the appliance to cool down completely before putting it into storage.
When no longer using the device, store the product in a dry environment, protected from
dust and direct sunlight. Do not place other objects on top of the cushion when it is stored,
otherwise material damage can occur.
Store the device in the original case provided.
INSTRUCTIONS
Product description: see page 2, figure A
1. Ventilation mesh sleeve 2. 4X2 massage heads 3. Operation panel 4. Oversized hand
loops 5. Temperature switch 6. ON/OFF & Timer switch 7. Massage head direction switch
8. DC plug 9. Power adapter
Connect the connection plug on the mains adapter with the socket on the appliance. Connect
the connection plug on the mains adapter with the socket on the appliance.
Place the appliance around your neck so that the massage heads lie on the sides of the neck.
You can use the oversize gloves to align it. Secure the appliance by the oversize gloves.
Press the button
On/Off
Press the
Massage head direction switch
Press the
Temperature switch
the warmth function on.
Note: Use the appliance for a maximum of 15 minutes. Longer use may lead to over-stimula-
tion and hence tension in the muscles. The device will turn itself off after 15 minutes.
Note: For safety reasons, do not open the zip fastener of the device.
The device is designed in particular for use on the upper back area (in particular in the neck).
But it can also be used to massage abdominal, buttock and leg muscles.
switch.
to switch the warmth off. Press it once again to switch
to change rotation direction.
EN
11