HOW TO USE
1. Use provided USB cable to plug the sanitizer into a wall outlet or other
USB charger.
2. Open up (Fig. 1).
3. Place phone or other items inside (Fig. 2).
4. Close and secure clasp lock (Fig. 3).
5. Press power button (Fig. 4).
6. Blue light stops flashing when sanitizing is complete.
7. Undo clasp lock.
8. Flip phone or other items and repeat to sanitize both sides.
NOTE: The case will not work if it is not completely closed and the clasp
situated magnetically in the on position.
Fig. 1
Fig. 3
7
Fig. 2
Fig. 4