Important Remarks - AQUALUX 103458 Manual Del Usuario

It is imperative to change as rapidly as soon as any element or combination of items damaged.
x x x
x x
x x
x
x
x
x
x
x
• In order to improve our products quality, we reserve the right to modify the composition and the configuration of our
filtration unit at any time and without any advance warning.
• Descriptions and characteristics featured on this document are given for information only and are not contractual.
• Are not guaranteed :
- Problems due to a commercial, professional or collective use.
- Damages due to an installation, which does not comply with the manufacturer prescriptions and methods.
• Failure to observe installation and/or use conditions leads to the warranty cancellation and disclaims all responsibility
of the manufacturer.
Sand filters are warranted against defects in material and workmanship for a period of 5 years for the tank, 1 year for pump (excluding dry
running) and 1 year for the rest of the components, from the date of shipping. Other components (strainers, collector, base, trim, etc.) are
considered consumables. Wear parts are not covered by this warranty. This warranty is subject to compliance with the assembly instructions and
/ or maintenance. Interventions under the warranty shall not have the effect of extending the length of it. The presentation of the invoice must be
submitted when the guarantee is invoked. Under this warranty, the only obligation of the seller will be free replacement or repair of the product or
component found to be defective by the services of the seller. All other costs will be the responsibility of the buyer. To qualify for this warranty, all
products must be submitted in advance to the customer service of the seller, whose agreement is essential for any replacement.
The guarantee does not apply in case of defect. Also excluded are defects and deterioration caused by normal wear, defects resulting from assembly
and / or a non-conforming use, and product modifications carried out without the consent of the seller.
Legal guarantee: provided that the purchaser makes the proof of hidden defect, the seller must legally repair all the consequences (Article 1641
of the Civil Code). If the buyer goes to court, it must do so within a short time after the discovery of the hidden defect (Article 1648 of the Civil
Code).
• To improve the quality of our products, we reserve the right to modify at any time and without notice, the composition and configuration of our
filtration plates.
• Descriptions and specifications contained in this document is provided for information only and are not contractual.
• Not covered: - Problems arising from commercial to use, professional or collective.
- Damage caused by dry running of the pump (overheating / alteration of the mechanical seal).
IX. POSSIBLE BREAKDOWNS
Use only approved parts responsible for the placing on the market.
C
auses
Air inlet
No water in the pump housing
Blocking /
friction fan
Internal friction
(Bearing / trim / turbine)
Axis locked
Poor fixation of the pump on the
bas
Obstruction of the hydraulic circuit
Foreign body in the turbine
No power
x
Internal fault element
(broken strainer mounting / valve)
x Use of sand not suitable
(masonry, ...)
X. IMPORTANT REMARKS
Check the tightness of connections (PTFE tape), the pipe,
valve and cover gasket
Fill the body pump with water
Refocus the hood and check no object blocking, run the pump
with a screwdriver
Run the pump by inserting a screwdriver horizontally on
the screw head into the fan cover (this simply confirms
the diagnosis) Requires then dismantling the pump by a
professional)
Unlocking the axis by inserting a screwdriver horizontally on
the screw head in the fan hood
Fix the pump on the base and place the plate on a stable and
not sound reverberator
Clean the skimmer basket, the basket of the pump, check the
absence of foreign body in the pipes, making a filter against
washing
Requires disassembly of the pump by a professional
Reconnect the plug, if a guard is appliance is switched off
(30mA, circuit breaker, fuse) clearly identify the cause before
re-arming in doubt consult a qualified electrician
Check manipulating the absence of sand in the valve (seal
wear) = replace the valve, remove the sand and check the
condition of the strainers = replace the screen
Replace with pool filter sand
XI. WARRANTY
9 | NOTPSB-INDG-0117
s
olutions