Daewoo International DLX-1088 Manual De Usuario página 10

• Hold the Handle and move the Skin Contact Bars to the skin hairs in
the selected area.
• A gently beep sound comes out and Contact LED On.
• Press the Laser Release button, laser generates to burn hairs.
• Pick up and move the Skin Contact Bars to another selected area for
next treatment.
• The DLX-1088 laser hair remover works best if you treat one hair at a
time.
• It is normal to feel a slight tingling sensation.
• After treatment, apply Cooling gel to treated areas. It will provide an
instant cooling effect and proper hydration of the epidermis.
• Don't treat the same area of skin more than once every 2 weeks. It
can take up to 2 months for a hair follicle to die and release its hair.
• Let the hairs gradually fall out, may take up to 10 to 14 days.
• It can take up to 5 treatments to remove hairs permanently.
• Must be followed above procedure to use the device, otherwise it will
be created a Dangerous Harmful radiation.
• Do not put your face near or expose your eyes to the Laser Aperture
while using the device.
• If any interference causes no function, press the RESET button.
10