Westin 22-1355 Manual Del Instrucciones

AUTOMOTIVE PRODUCTS, INC.
MOUNT KIT
EQUIPO DE MONTAJE
TROUSSE DE MONTAGE
22-1355
CHROME/CROMADO/CHROME
22-5050
BLACK/NEGRO/NOIR
22-5055
ITEM QTY
1 2 STEP BAR (PURCHASED SEPARATELY)
2,3 2 FRONT BRACKET, PASSENGER (2) AND DRIVER (3)
4,5 2 REAR BRACKET, PASSENGER (4) AND DRIVER (5)
6,7 2 FRONT SUPPORT BRACE, PASSENGER (6) AND DRIVER (7)
8 2 M6-1.00 X 20MM HEX HEAD BOLT
9 4 M6 FLAT WASHER
10 2 M6 LOCK WASHER
11 2 M6-1.0 HEX NUT
12 2 1/4-20 X 1.00" HEX HEAD BOLT
13 2 1/4" LOCK WASHER
14 2 1/4-20 HEX NUT
15 4 M6 BOLT PLATES (INCLUDED WITH STEP TUBES )
16 16 M6 FLAT WASHERS (INCLUDED WITH STEP TUBES)
17 16 M6 LOCK NUTS (INCLUDED WITH STEP TUBES)
1 2 ESTRIBOS, (SE COMPRA SEPARADO)
2,3 2 SOPORTE DELANTERAS, LADO DEL ACOMPAÑANTE (2) Y CONDUCTOR (3)
4,5 2 SOPORTE TRASERAS, LADO DEL ACOMPAÑANTE (4) Y CONDUCTOR (5)
6,7 2 PIEZA DE SUJECIÓN DEL SOPORTE DELANTERO, LADO DEL ACOMPAÑANTE (6) Y
CONDUCTOR (7)
8 2 PERNOS CON CABEZA HEXAGONAL DE M6-1.00 X 20MM
9 4 ARANDELAS PLANAS DE M6
10 2 ARANDELAS DE PRESIÓN DE M6
11 2 TUERCAS HEXAGONALES DE M6-1,0
12 2 PERNOS CON CABEZA HEXAGONAL DE 1/4-20 X 1,00"
13 2 ARANDELAS DE PRESIÓN DE 1/4"
14 2 TUERCAS HEXAGONALES DE 1/4-20
15 4 TORNILLO M6 PLACAS (INCLUIDO CON TUBOS STEP)
16 16 M6 ARANDELAS PLANAS (INCLUIDO CON TUBOS DE PASO)
17 16 Las TUERCAS M6 (INCLUIDO CON TUBOS DE PASO)
1 2 MARCHE-PIEDS, (ACHETE SEPAREMENT)
2,3 2 SUPPORTS AVANT, COTE PASSAGER (2) ET COTE CONDUCTEUR (3)
4,5 2 SUPPORTS ARRIERE, COTE PASSAGER (4) ET COTE CONDUCTEUR (5)
6,7 2 RENFORT DE SUPPORT AVANT, COTE PASSAGER (6) ET COTE CONDUCTEUR (7)
8 2 BOULONS A TETE HEXAGONALE
9 4 RONDELLES PLATES M6
10 4 RONDELLES A FREIN M6
11 4 ÉCROUS HEXAGONAUX M6-1,0
12 2 BOULONS A TETE HEXAGONALE
13 2 RONDELLES A FREIN 1/4 PO
14 2 ÉCROUS HEXAGONAUX 1/4-20
15 4 Boulon M6 PLAQUES (inclus avec TUBES STEP)
16 16 M6 RONDELLES PLATES (inclus avec TUBES STEP)
17 16 NUTS M6 LOCK (inclus avec TUBES STEP)
Remove contents from box and check for damage. Verify all parts are present. Read instructions com-
STEP 1.
pletely before beginning.
Remove existing body mount bolts as shown. DO NOT DISCARD! SEE FIGURE 1.
STEP 2.
Install front and rear brackets as shown. Hand tighten. SEE FIGURES 1 AND 3.
STEP 3.
Remove existing M6 bolt from underside of front body panel and replace with supplied M6 bolt.
STEP 4.
FIGURE 2.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION: 2003-05 KIA SORENTO
APLICACIÓN:
APPLICATION: KIT SORENTO 2003-05
1
CONTENTS - CONTENIDO
M8-1,00 X 20 MM
1/4-20 X 1,00 PO
KIA SORENTO , MOD. 2003-05
- CONTENU
WO:
2 3
4 5
TOOLS - HERRAMIENTA
7/16" WRENCH
14MM DEEP SOCKET
RATCHET
SOCKET EXTENSION
TORQUE WRENCH
LLAVE DE TUERCAS DE 7/16"
DADO DE ALCANCE PROFUNDO DE 14MM
MANERAL
EXTENSIÓN PARA DADO
LLAVE DE TORQUE
CLEF 7/16 PO
DOUILLE PROFONDE 14MM
CLIQUET
RALLONGE DE DOUILLE
CLEF DE COUPLE
75-0661 REVISION C 7/11/11
6
7
- OUTILS
SEE