BGS technic 8317 Manual De Instrucciones página 4

USE
Crankshaft Locking Bolt (with Common Rail) (1),
to be used as OEM 303-698 (21-251)
Crankshaft Locking Bolt (without Common Rail) (2),
to be used as OEM 303-675 (21-234)
Take out the crankshaft's position-sensor (it is located at the
side of the engine) and slide the locking bolt appropriately.
Camshaft / Pump Locking Pin (3)
Put the camshaft and pump locking pins into the pump and
camshaft sprocket when in correct position.
Pump Sprocket Locking Tool (4)
Pump Sprocket Locking Bolt (5)
to be used as OEM 303-681 (21-240)
Lock the sprocket at its front cover by using the locking tool
and the locking bolt. Now you can loosen the pump wheel
and remove the fuel pump.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed