Alcad 905-TO COFDM-PAL Serie Guía Rápida De Programación página 3

QUICK PROGRAMMING GUIDE 905-TO COFDM TO PAL
Start/on
Main menu
Select series Transcodifi cador 912 QPSK - COFDM
NIT Table
Select series
905-TO Transmodulator COFDM-PAL
905-ZA Programmable fi lter
905-TO Transmodulator COFDM-PAL
Confi gure module
Set the programming switch of the 905-TO module to the ON position. The programming
Program by
Channel
Channel
Frequency
Input
Channel
21
Frequency
474.00
Off set
Auto
Bandwith
8
Output
OSD Language
English
Standard
BG/ stereo
Channel
21
Frequency
471.25
indicator will now light up and remain lit.
OK+
MHz
+1/6 MHz OK+
OK+
MHz
OK+
OK+
OK+
MHz
Press the Power On key of the PS-011 to start up the
system.
Choose Select Series to select the programming series.
OK
Select the series: 905-TO Transmodulator COFDM-
OK
PAL.
To commence programming the module, select Confi gure
OK
module.
Select the programming mode of the module: channel
OK+ +OK
or frequency.
If you are programming the output by channel, you
Keypad + T
can either enter the channel using the numeric keypad
o
or select a channel from the pulldown list. Confi rm you
+OK+T
choice with OK, then press T to transmit.
If you are programming the module by frequency, enter
Keypad + T
the frequency using the numeric keypad. Then press T
to transmit.
Select the offset of the input channel. By default it is
+OK+T
set to Auto. Then press T to transmit.
Select the bandwidth of the input channel, 7 or 8
+OK+T
MHz. Then press T to transmit.
Select the language of the OSD. Then press T to
+OK+T
transmit.
Select the standard for the output channel. Then press
+OK+T
T to transmit.
If you are programming the output by channel, you
Keypad + T
can either enter the channel using the numeric keypad
or
or select a channel from the pulldown list. Confi rm you
+OK+T
choice with OK, then press T to transmit.
If you are programming the module by frequency, enter
Keypad + T
the frequency using the numeric keypad. Then press T
to transmit.
ENG