Procedures Include The Following Parameters - ChoiceMMed MDTS100 Manual De Instrucciones

Size of electrodes (in.): 1.57×1.57
Weight: 2.2oz (Battery Excluded)
Power: DC 3V, 2 AAA batteries
Life of Pads: Up to 80 Uses
Power Requirements
Two AAA Alkaline Batteries
Battery Life: Two AAA 1.5V, 800mAh alkaline batteries could be continuously operated as long
as 20h.
Environment Condition
Environmental condition for transportable & storage
Temperature Range: -13 ℉ ~158 ℉ (-25℃ ~70℃ )
Humidity: ≤93%
Atmosphere Pressure: 700hPa~1060hPa
Environment condition for operation
Temperature Range: 41 ℉ ~104 ℉ (5℃ ~40℃ )
Humidity: 15% to 93% RH
Atmosphere Pressure: 700hPa~1060hPa
Technical Specification
Power Source: 3V battery
Number of output modes: 7
Number of alternating output channels: 2
Timer Range (minutes): 20 minutes
Dimensions (in.) [W x H x D]: 2.17x 5.12x0.87
Waveform: monophasic
Shape: monophasic square wave
Maximum Output Voltage(±20%): 150V@500Ω; 60V @2kΩ; 165V@10kΩ
Maximum Output Current(±20%): 300mA @500Ω; 80mA @2kΩ; 16.5mA @10kΩ
Duration of primary (depolarizing) phase: 0µsec
Pulse Duration: 50~140µsec
Frequency: 0.9Hz~82Hz
Net charge: 42µC@500Ω
Maximum phase charge: 42µC@500Ω
Maximum current density: 3.3mA/cm2
Maximum average current: 2.8 mA
Maximum average power density: 0.02 W/cm2
Burst Mode (Pulses per burst): 197
(Burst per second): 0.185
(Burst duration): 2.4s
(Duty Cycle): 0.44
ON TIME: ≤1second
OFF TIME: ≤1second

9 procedures include the following parameters:

Procedure contains the master pulse and the sub pulse, the working time of master pulse
consists of several sub pulses while the sub pulse consists of several single pulses. Without
special instruction in procedure: single pulse width is 140µS; the therapy time is 20 minutes.
Mode 1
• Frequency : 35Hz
• Pulse Width: 50-140µS
4