Redfern Enterprises EuroSteam Xfree 6236 Manual De Instrucciones página 9

*Cleaning the appliance is important to the performance of the iron*
8. Cleaning
We recommend that the following cleaning instructions be carried out
every 2-3 months or if you notice any water drops leaking out of the
soleplate of the Eurosteam
Clean plastic parts with a damp, non-abrasive cloth and dry them with
a dry cloth.
Soleplate
Before cleaning the iron be sure that the unit is disconnected from the power supply and that
the iron is completely cooled down. Do not use abrasives on the soleplate. Deposits and
other residues on the soleplate can be removed with a cloth soaked in a vinegar and water
solution. Keep the soleplate smooth by avoiding contact with hard or abrasive surfaces.
TIP
Water Tank
iron rest. When the indicator light shuts of f, unplug the unit from the power source and let
sit for 10 minutes. Shake vigorously in all directions and allow to cool for 10 minutes more.
For a Self Clean System... Fill the water tank for a quarter using the measuring cup provided.
Fill the tank up to the level marked MAX. Put the iron on its iron rest. Plug into the mains
water will come out from the plate holes removing the lime scale and impurities that have
accumulated inside the plate. Gently move the iron back and forth until the tank is com-
self-cleaning procedure.
®
iron.
Before using the iron again, try it on an old piece of cloth
to make sure that the soleplate and tank are clean and to
allow residual water to vaporize.
CLEANING YOUR EUROSTEAM ®
9