CONFORM Orlo MYPLACE CSBO-1 Manual Del Usario página 3

Power and charging
Connect the power adapter to your electrical
outlet and then the cable to the unit's magnetic
power connector. When the cable is connected
the internal batteries are charged until full.
Turning On/Off
To start the unit, press the PWR button.
To turn the unit off, press the PWR button
for 1 second.
Bluetooth pairing and connection
®
If the unit is off, you enter the pairing mode by
pressing the PWR button for 3 seconds until the
LED starts blinking blue. If the unit is already
on, you double-click PWR. Make a Bluetooth
search on the device you want to connect and
select the item called "Conform Sound by Orlo
XX" (XX is a number between 01 and 99). The
connection will be confirmed by a pairing sound
from the unit, which is now ready to receive
sound over Bluetooth .
®
Pairing two chairs
It is possible to connect two chairs to each other
via Bluetooth . Double-click the TWS button
®
on both chairs. They will then find each other
within a few seconds. To connect TWS, short
press the TWS button once; to disconnect,
press the TWS button for 1 second.
The unit playing sound and/or having a Line-In
cable connected will dynamically become
the primary unit - and the other will become a
secondary, replicating unit.
MYPLACE
QUICK START
Line-In
The Line-In input can be used for connecting
sound sources such as smartphones, tablets,
computer, hi-fi equipment, television sets, etc.
The sound coming from Line-In can also be
sent to the secondary unit via TWS.
Line-Out
Line-Out is always active and can be used to
connect peripherals like headphones, etc.
Choosing sound source
Toggle between Bluetooth
source (toggle only available on the primary unit
if having an active TWS connection) by pressing
®
the PWR button.
PWR button
Line-Out
and a Line-In
®
LED indicator
Power
ENG
TWS button
Line-In
3