Spengler TENSONIC Manual página 74

Unit Operation
74
5. Deleting/Storing Test Results
User may delete their current test result due to unfavorable
testing conditions or for any other reason. To delete the last
test result, press the «SET» button after result is displayed.
If result is not deleted, it will automatically store by date
within the previously configured Memory Group.
Note: be sure the appropriate Memory Group selection is made
prior to testing.
If the number of tests surpasses the allotted 60 memories per
group, the most recent tests will appear first, thus eliminating
the oldest readings.
www.spengler.fr