Tool it DBT400 Instrucciones De Operación página 10

8.
Press the
battery fully charged or not if
tester asks. Press <ENTER>
to confirm choice.
9.
When the test is completed, the display shows the
actual volts and the actual CCA or %.
One of six results will be displayed:
GOOD & PASS :
The battery is good & capable
of holding a charge.
Press the▲\▼ key to show:
SOH (STATE OF HEALTH) &
SOC (STATE OF CHARGE).
GOOD & RECHARGE :
The battery is good but needs
to be recharged.
Press the▲\▼ key to show:
SOH (STATE OF HEALTH) &
SOC (STATE OF CHARGE).
RECHARGE & RETEST :
Battery is discharged. The
battery condition cannot be
determined until it is fully
charged. Recharge & retest
the battery.
Press the▲\▼ key to show:

key to select
EN - 10
BATTERY FULLY
CHARGED? YES
GOOD & PASS
××.××V ×××× SAE
SOH: ×××× SAE

×××× SAE ↵
SOH:
 XX%
SOC: ××.×× V

GOOD & RECHARGE
××.××V ×××× SAE
SOH: ×××× SAE

×××× SAE ↵
SOH:
 XX%
SOC: ××.×× V

RECHARGE & RETEST
××.××V ×××× SAE
SOH: ×××× SAE

SOH: ×××× SAE
 XX%
SOC: ××.×× V

↵
↵
XX%
XX%
XX%
XX%
XX%
↵
XX%