Olsen PerformanceGineco Guía Rápida

Performance Gyneco Table Quick Operation Guide - Description of Parts and Controls of Equipment
Before using the equipment, please read the User Manual Performance Gyneco Table carefully.
Athe purpose of this guide is to identify commands, parts, and instruments that may be available to the equipment, including optional items.
This guide does not define the equipment configuration that may vary according to the customer's request.
In case of loss of the user manual contact us by e-mail informing the serial number of your equipment.
Turning On the Equipment:
1
3
2
1º - On the electrical panel (F01) press the On/Off switch (F01-1) to the "I" position;
2° - The switch´s LED (F01-2) will light, indicating that the equipment is ready for use;
3º - To turn Off, press the On/Off switch (F01-1) to the "O" position.
1
3
5
2
1 - Seat Up
2 - Seat Down
3 - Backrest Down
Observe the Scheduled Review system for your equipment - Chapter 15 of the User Manual Performance Gyneco Table.
1 - On/Off Switch
2 - Switch's LED
3 - Fuse Holder
F01
4
6
F02
4 - Backrest Up
5 - Seat Incline
6 - Seat Recline
4
1
5
2
7
3
F03
Double Bracket Locks:
7
3
1
F06
1º - To adjust the height or distance from the seat, rotate the plastic handle (F03-1/F05-1/F06-1) counterclockwise.
Adjust the accessory to the desired position and tighten the plastic handle (F03-1/F05-1/F06-1) by turning it
clockwise;
2º - To adjust the depth along the seat, on the metal handle (F03-3/F05-3/F06-3) turn the lever (F03-7/F05-7/F06-7)
clockwise, push it upwards causing the metal lever (F03-7/F05-7/F06-7) to pass through the metallic knob's
axis (F03-3/F05-3/F06-3) and then rotate it again.
Note: the metal lever ( F03-7/F05-7/F06-7 ) moves only in the area indicated (F05/F06).
1
2
F07
1º - To use these items, pull the sliding extender (F07-2) until its structure engages on the latches;
2º - To use the stainless tray (F08-3), just remove the extender upholstery (F07-1);
3º - To use the upholstery (F07-1), simply position it on the latches (F08-4);
4º - To retract the sliding extender (F07-2), position the extender´s tray (
compartments and push the sliding extender (F07-2) up to the end of the stroke.
6
1
3
F04
Plastic Handle
1 -
2 - Bracket Lock Body
3 - Metal Handle
4 - Adjustable Sliding Fit
5 - Left Bracket Lock
6 - Right Bracket Lock
7 - Metal Lever
1 - Extender Upholstery
2 - Sliding Extender
3 - Stainless Tray
4 - Latches
4 3
F08
F08-3 ) and upholstery (F07-1) in its
Page 01 - 5409199 - R01
- Equipments made to last!
7
F05