Care And Maintenance - PVI SFW230 Manual Del Usuario

INSTALLATION INSTRUCTIONS
1. Ramp comes preassembled. Position the
ramp approximately the ramp's length out
from the step or platform. Stand ramp up on
end with the open ends down and the handle
side toward you. Reach down and lift first half
of ramp toward the step or landing area and
set it down on top of support. Make sure hook
is pressed firmly against step.
2. Open top half of left side ramp panel (A).

CARE AND MAINTENANCE

These ramps are maintenance free, but to keep product in excellent condition follow these tips
These ramps are maintenance free, but to keep product in excellent
• Store in a cool dry place when not in use.
condition follow these tips.
• Keep ramp clean and free of debris.
• Store in a cool dry place when not in use.
• Do not leave ramp out during harsh weather conditions.
• If ice or snow accumulates on ramp, do NOT use metal objects to remove. Instead, use plast
• Keep ramp clean and free of debris.
shovel or non-corrosive ice melt.
• Do not leave ramp out during harsh weather conditions.
• If ice or snow accumulates on ramp, do NOT use metal objects
to remove. Instead, use plastic shovel or non-corrosive
ice melt (labeled as "pet friendly" or "pet safe" ice melt).
3. Unfold left side ramp panel (A) toward you
and once again make sure ramp hooks are
pressed firmly against landing area.
4.
Replace the single-fold ramp (A) and
insert the clevis pins (AA) into the
holes to secure it in place.
5
5
1
2
3
A
B
A
B
A
B