Ryobi PBP005 Guia Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BATTERY PROTECTION FEATURES
Lithium-ion battery packs are designed with features that protect
the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures down
to 14°F. Put the battery pack on a tool and use the tool in a light
duty application. After about a minute, the pack will warm up
and begin operating normally.
BATTERY FUEL GAUGE
To display the amount of charge left in the battery, press the
charge level indicator button:
LED FUNCTIONS
CHARGING THE BATTERY PACK
See Figure 1.
Battery packs are shipped in a low charge condition to prevent
possible problems. Therefore, you should charge prior to first
use. If the charger does not charge the battery pack under
normal circumstances, return both the battery pack and charger
to your nearest Authorized Service Center for electrical check.
CHARGE LEVEL
INDICATOR BUTTON
CHARGE LEVEL
INDICATOR
 Charge the battery pack only with the recommended charger.
 Refer to charger operator's manual for charging instructions.
CHARGE STATUS
0 - 10%
10 - 25%
25 - 50%
50 - 75%
75 - 100%
Fig. 1
2 - English
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become
hot. A hot battery pack may be placed directly onto the charger
port but charging will not begin until the battery temperature cools
to within acceptable temperature range. When a hot battery pack
is placed on the charger, the charger may indicate the pack is
not ready to charge. Please refer to charger operator's manual.
When the battery pack cools, the charger will automatically
begin charging.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port
but charging will not begin until the battery temperature warms to
within acceptable temperature range. When a cold battery pack
is placed on the charger, the charger may indicate the pack is
not ready to charge. Please refer to charger operator's manual.
When the battery pack warms, the charger will automatically
begin charging.
MAINTENANCE
BATTERIES
These batteries have been designed to provide maximum
trouble-free life. However, like all batteries, they will eventually
wear out. Do not disassemble battery pack and attempt to
replace the batteries. Handling of these batteries, especially
when wearing rings and jewelry, could result in a serious burn.
For battery pack storage longer than 30 days:
 Store the battery pack where the temperature is below 80°F
and away from moisture.
 Store battery packs in a 30%-50% charged condition.
 Every six months of storage, charge the pack as normal.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
To preserve natural resources, please recycle or
dispose of batteries properly.
This product contains lithium-ion batteries. Local,
state or federal laws may prohibit disposal of
lithium-ion batteries in ordinary trash.
Consult your local waste authority for information regarding
available recycling and/or disposal options.
WARNING!
Upon removal, cover the battery pack's terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its components.
Batteries must be recycled or disposed of properly. Also,
never touch both terminals with metal objects and/or body
parts as short circuit may result. Keep away from children.
Failure to comply with these warnings could result in fire
and/or serious injury.
SAVE THESE INSTRUCTIONS

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pbp006

Tabla de contenido