Celestron DX Manual De Uso página 2

Smartphone Adapter DX Kit
#81037 ENGLISH
USING YOUR BLUETOOTH REMOTE
1
1. To insert or replace the battery, place your thumb in the center of the back cover, pressing inward and
sliding downward remove the battery door. The CR2032 battery should be inserted with the positive
(+) side facing upward. Replace the cover.
2. Press and hold the button on the remote for 5 seconds. A blue light will turn on and, after a few
seconds, start to blink. The remote is now in pairing mode.
3. Using the Bluetooth settings on your phone, pair the device called "GBshutter".
4. Open your camera app. Press the button on the remote to trigger the shutter on your phone.
5. If your camera is in video mode, you can press the button once to start recording and again to
stop the recording.
© 2020 Celestron • All rights reserved
celestron.com/pages/technical-support
2835 Columbia Street
Torrance, CA 90503 USA
2 3 4
celestron.com/pages/warranty
5
ENGLISH I 2