Cleaning And Maintenance; Troubleshooting - H.Koenig G2 Manual De Utilización

1. Unplug the appliance and let it cool down for 60 minutes.
2. After usage, always empty the water tank (Fig.10)
3. The iron should be stored in its rest pad.
1. Unplug the appliance and let it cool down completely.
2. Clean the iron with a wet cloth.
3. Make sure you do not leave any lime scale traces. However, do not use
abrasive materials to clean the iron (Fig.11)
4. Do not clean the appliance with water. A wet cloth is sufficient.
PROBLEMS
The iron does not heat
The tank LED will not lit on
and no steam will come off
There is water condensing
on the iron sole
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a
separation of this waste product into communities, you will need to inform your local
authorities about the places where you can return this product. In fact, electrical and electronic
products contain hazardous substances that have harmful effects on the environment or human

CLEANING AND MAINTENANCE

TROUBLESHOOTING

POSSIBLE CAUSES
The plug may not be
correctly plugged in
The temperature wheel is set
up to"MIN"
Unknown malfunction
The filter is incorrectly
installed
The reservoir is not placed in
its correct position
The temperature wheel is set
up to"MIN"
The desired temperature has
not been reached or is too
low
SOLUTIONS
Plug the appliance correctly
Set up the temperature
wheel to the desired
temperature
Call in a professional
repairman or send the
appliance back to the maker
for repair
Place the filter correctly
Place the reservoir till you
hear a "click" sound
Set up the temperature
wheel to the desired
temperature
Allow sufficient time for the
iron to heat up.