AGPtek SP11 Manual Del Usuario página 3

the LED indicator turns off after fully charging.
2. POWER ON/OFF.
᛫
Power On.
of the unit to ON position.
᛫
Power Off.
of the unit to OFF position.
NOTE: After turning on the speaker, if there is no
Bluetooth device to pair or connect within 5 minutes, it
will enter the deep sleep state; Slide the power switch
again to turn on the speaker.
3. PAIR & CONNECT.
The speaker allows connecting 2 mobile phones with
Bluetooth function simultaneously. If only pair and
connect 1 mobile phone, just connect the device once.
The pairing steps are as follows:
᛫
Connect To 1 Mobile Phone
1) Keep the distance between the mobile phone and
the speaker within 3m (for pairing only).
2) Turn on the speaker, and then a voice prompt will be
heard, which means that the speaker is in pairing
mode.
3) Enable the Bluetooth of mobile phone to search for
the Bluetooth devices (More details refer to the using
instruction of mobile phone).
Slide the power switch located on the side
Slide the power switch located on the side
2