IMPORTANT:
If installing a range hood or microwave hood combination above the cooktop,
follow the range hood or microwave hood combination installation instructions for
dimensions and clearance above the cooktop surface.
Back wall
A
22" - 22⅛" (558 mm - 562 mm)
B
1813/16" - 19" (478 mm - 482 mm)
C
Cut area and backwall of Cooktop – minimum 1⅛" (28 mm)
D
Front edge of cut area and front edge of worktop – minimum 1½" (38 mm)
E
Flammable surface closest to the Cooktop (left/right) – minimum 1" (26 mm)
F
Junction box or outlet from cabinet right – maximum 10" (254 mm)
G
Junction box or outlet from cabinet bottom - minimum Junction box or outlet
H
Insulating board 2" (50.9 mm) mininum from bottom of Cooktop
Install_NZ24T4360RK_EN.indd 5
Cooktop
Worktop
Minimum distance from
flammable sidewalls
Junction box
on top of the worktop
(both directions)
Dimension
15" (381 mm)
Single Oven Under counter
01 See manual of built-in oven installation
H
A
02 Refer installation Manual of oven.
E
G
C
D
F
B
A
Minimum 3¾" (95 mm)
B
4" (101 mm)
Minimum 221/16" / Maximum 22¼" (Minimum 560 mm / Maximum 565 mm)
C
D
Minimum 1"/ Maximum 1¼" (Minimum 25 mm / Maximum 32 mm)
E
Minimum 23¼"/ Maximum 23½" (Minimum 590 mm / Maximum 596 mm)
F
22¼" (565 mm)
Minimum 22¼" (Minimum 565 mm)
G
H
Maximum 9½" (Maximum 241 mm) – Junction Box
for complete installation instructions.
See label on top of approved built-in
oven models.
Dimension
English 5
2020-06-18
12:05:34