Changing A Fuser - Watts TRITON TRCU1 Guía Del Usuario & Manual De Instrucciones

All manuals and user guides at all-guides.com
Equipment Setup & Usage Instructions

Changing a Fuser

STEP 1
Disconnect Fuser cord from Fuser.
STEP 2
Connect new Fuser to Fuser Cord.
STEP 3
Calibrate Fuser.
WARNING
Always follow all operating instructions
2 seconds and release. This allows the
Control Unit to recognize the Fuser's size
and profile.
button will turn green. When ready the
Control Unit display will read "Fuser Ready
to Start" alternating with "Assemble Fitting
& Attach Fuser."
16