Ansel 2012 Manual De Usuario página 65

Modelo: 2012
Apéndice A
Especificaciones del Hardware:
MCU/RF Atheros AR2313+AR5112
Memory 32MB SDRAM
Flash 8MB
Physical Interface One 10/100 Fast Ethernet RJ- 45
Reset Button
2 x SMA Connector
LED indicators Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
• Green: Good Quality
• Yellow: Marginally Acceptable Quality
• Red: Bad Quality
Power Requirements Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC
Regulati on Certifications FCC Part 15C/15B/15E, EN 300 328/EN 301 489- 1/ -17
RF Specification
Frequency Band
802.11a = 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
Modulation Te chnology OFDM = BPSK, QPSK, 16-QAM, 64-QAM
Operating Channels
802.11b/g = 11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical)
802.11b
-88dBm @ 6Mbps, -92 dBm @ 6Mbps,
-70dBm @ 54Mbps
91 dBm @ 11Mbps
Available transmit power (Average power) FCC ETSI
Internal Antenna 1 x 5dBi 2.4GHz Panel Antenna + 1 x 13dBi 5GHz Panel Antenna
External Antenna 2 x SMA connector (for 2.4GHz and 5GHz individually)
802.11b/g = 2.412~2.472GHz
DSSS = DBPSK, DQPSK, CCK
802.11a = See the Table1
802.11a
-75 dBm @ 54Mbp
65
802.11g
-93 dBm @ 1Mbps
-