auna multimedia SOUNDBLASTER M Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

You can conveniently navigate through the CD / MP3-CD in the conventional way, using
Stop the CD (
) and press and hold
ture). Playing MP3-CDs with folders, this would lead to skipping to the next folder.
If no CD is inserted or the inserted CD is not readable (due to wrong file format, dirt or damage to the CD), NO
DISC will be shown on the display.
Programming a playlist
Programming a playlist is possible when the playback is stopped. Up to 20 tracks for CD disc and 99 tracks for MP3
disc can be stored in the memory in any order.
In stop mode, press PROG/P-MODE to enter program setting. The PROG logo will flash on the display and show
P01.
Press
/+10 to select the first desired track to be programmed (for example: track 2).
Press PROG/P-MODE to confirm. The display would flash PROG and show P02.
Repeat these steps to store other desired tracks until all tracks are programmed.
Press
to start playback from the first programmed track.
To clear the program, you may press
Repeat and random modes
During Playback, press PROG/P-MODE repeatedly for
a)
-
repeating the current track.
b)
ALL -
repeating the whole volume.
c)
DIR -
repeating the current directory (in MP3 mode only).
d) RAN -
playing the tracks on the volume in a randomized sequence.
e) -
deactivating the repeat and random modes.
Switch to the USB or SD mode using FUNC. Connect any suitable USB volume (USB stick, MP3 player, USB hard
drive or similar) or a SD card respectively.
You can conveniently navigate through your music library in the conventional way, using
analoguos to the way you would use a CD volume. According to the MP3-CD usage, holding
ping folders; the functions repeat and random are the same as well.
Please note: Do not use any USB extension cables for connecting the USB bar as this may cause harmful interference.
Switch to the BT mode using FUNC. The display shows bT and the pairing LED (7) flashes.
Activate BT on your smart device and connect with „SOUNDBLASTER".
If you are asked for a password, please type in „0000".
The successful connection will be indicated by the blue LED (7) and bT on the display. You now can play back sound
from your mobile device through the SOUNDBLASTER M.
You can conveniently navigate through your music library in the conventional way, using
Please note: BT works best within a range of 10m.
Connect any external music or media player (CD/MP3 player, smartphone, laptop, computer or similar) to the Aux
input (8) of the SOUNDBLASTER M via a 3.5mm audio cable.
Use the external player as you are used to. Do, however, not forget to turn the volume up.
/+10 to skip 10 tracks at once (useful for MP3-CDs without any folder struc-
when the disc stopped and open the CD lid.
USB / SD Card
BT
AUX
,
and
/
.
,
and
/
/
means skip-
,
and
/
14

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10028210

Tabla de contenido