Installation And Start-Up; Room Temperature - Lec CLT140 Instrucciones Para El Uso

Installation and start-up
Placement
For safety and operational reasons, the ap-
pliance must not be installed outdoors. The
appliance should be placed on a stable,
level surface in a dry, well-ventilated room
(max. 75% relative air humidity).Never
place the appliance close to sources of heat
such as cookers or radiators, and avoid
placing it in direct sunlight.
Ventilation
It is important that the appliance be well
ventilated and that air can circulate unhin-
dered above, below and around it. Figure 2
illustrates how the necessary air circulation
can be ensured.
Keep ventilation openings, in the appliance
enclosure or in the built-in structure,
clear of obstruction.
Room temperature
The appliance is designed to operate at lim-
ited ambient temperatures according to the
appliance climatic category specified on the
nameplate. Data regarding climate Class
and other technical information are given on
the nameplate on the rear of the appliance.
Climate class
SN
N
ST
T
Optimum room
temperature
+10 ºC to +32 ºC
+16 ºC to +32 ºC
+18 ºC to +38 ºC
+18 ºC to +43 ºC
There must be at least 35 mm. clearance
between the base of the appliance and the
floor.
IMPORTANT! There must be free access
to the ventilation grille (fig. 3).
5
GB
fig. 2
fig. 3