Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Only unplug from the power outlet by the plug itself. Do not pull on the cord.
7.
Disconnect the power plug when the device is not in use, in case of
malfunctions, prior to attaching accessories and prior to each cleaning.
8.
If the power cord or the casing of the device is damaged or if the device is
dropped, the device may not be used before it is examined by a professional
electrician.
9.
A damaged power cord may only be replaced by the manufacturer or a
workshop commissioned by the manufacturer or by a similarly qualified person
in order to avoid hazards.
Installation location
1.
Place the device on a flat, sturdy and heat-resistant surface.
2.
Put the device in a place which is out of reach of children.
3.
Do not operate this device near flammable materials (e.g. curtains, textiles,
walls) and never cover it. Ensure that there is always a sufficient safe distance
from flammable materials.
4.
Use this device in dry indoor areas only and never outdoors.
5.
Warning: Do not use this device near water or heavy moisture; e.g. in a damp
basement or beside a swimming pool or bathtub.
6.
In order to reduce the risk of fire and electric shock, do not expose the device
to fire (fireplace, grill, candles, cigarettes and so on) or water (water drops,
water splashes, vases, tubs, ponds and so on).
7.
Keep this device away from all heat sources like for example, ovens, hot plates
and other heat-producing devices/objects.
8.
Protect this device from extreme heat (over 35°C / 95°F ) and cold (under 5°C
/ 41°F ) as well as from direct sunlight and dust.
SPECIFIC SAFETY INSTRUCTIONS
1.
Do not use the appliance to vacuum lighted matches or hot ash.
2.
Do not use the appliance to vacuum needles, drawing-pins or sharp items.
3.
Do not vacuum string, cement, plaster or other material for construction and
decorations.
4.
Do not vacuum up any water, liquid or damp dirt. This will cause major
faults and could seriously impair the functioning and electrical safety of the
appliance. Wait until any freshly cleaned or shampooed carpets or floor
coverings are completely dry before attempting to vacuum.
5.
Do not vacuum toner dust. Toner, such as that used in printers and
photocopiers, can conduct electricity. The filter system in the vacuum cleaner
may not filter it completely, causing the toner to be blown back into the room
by the fan.
6.
Do not obstruct air intake or outlet vents.
7.
Clean the device and other accessories refer to the chapter CARE AND
MAINTENANCE.
EN
4
Publicidad
Tabla de contenido
