Settings - System Check / Exit Settings - IndoorCycling Group MATRIX Coach By Color Manual Del Usuario

- SYSTEM CHECK
The System Check serves as a means of diagnosing errors for the Technical Service Team.
If errors should occur in the electronics, it is recommended to carry out the System Check. If
error messages (error codes) are shown on the display, these can be reset by pressing down the
confirm button for 2 seconds. After resetting the error message, the system is checked again.
If the error messages (error codes) are displayed again, please pass them onto the Technical
Service Team.
Exits the settings menus and returns to training mode.
SETTINGS
SETTINGS
- EXIT
17