Kohler K-1107 Manual Del Usuario página 2

Thank You For Choosing Kohler
Thank you for choosing the Bold Look of Kohler. Kohler craftsmanship offers you a rare combination of
proven performance and graceful sophistication that will satisfy you for years to come. The dependability
and beauty of your Kohler product will surpass your highest expectations. We're very proud of our products
here at Kohler and we know you will be too.
Please take a few minutes to study this Homeowners Guide. Pay special attention to the Care and Cleaning
instructions.
All information in this manual is based upon the latest product information available at the time of
publication. At Kohler, we constantly strive to improve the quality of our products. We reserve the right to
make changes in product characteristics, packaging or availability at any time without notice.
Cleaning Your Acrylic Bath
Do not use abrasive cleansers or solvents on acrylic surfaces.
Wipe out product with a soft cloth after each use.
Avoid detergents, disinfectants, or cleaning products in aerosol cans.
If the surface gets excessively dirty you can use a general purpose cleaner such as: Formula 409
Purpose Cleaner, Gel Gloss
Clean Lemon Fresh, Cinch
®
NOTE: To restore dull or scratched units: Apply white automotive polishing compound with a clean rag.
Rub scratches and dull areas vigorously. Wipe off residue. Follow with a coat of white automotive paste
wax. Do not wax areas where you walk or stand.
Cleaning Your Gel Coat Bath
Do not use abrasive cleansers or solvents on gel coat surfaces.
Wipe out your gel coat product with a soft cloth after each use.
If the surface gets excessively dirty you can use a general purpose cleaner such as: Formula 409
Purpose Cleaner, Gel Gloss
Clean Lemon Fresh, Cinch
®
automotive-type polishing compound, followed by an application of good-quality paste wax.
Avoid cleaning products that contain the following chemicals, as they will damage the finish of your
gel coat product: acetone, ethyl alcohol, amyl or ethyl acetate, sodium hypochlorite, toluene, or
phenol.
Extreme heat such as that generated by cigarettes or portable heaters can damage gel coat surfaces;
do not use such items near your gel coat unit.
Cleaning Your Vikrell Bath
Do not use abrasive cleansers or solvents on Vikrell surfaces.
Wipe out your Vikrell product with a soft cloth after each use.
If the surface of your Vikrell product becomes dull, use an automotive-type polishing compound,
followed by an application of good-quality paste wax.
Avoid cleaning products that contain the following chemicals, as they will damage the finish of your
Vikrell product: acetone, ethyl alcohol, amyl or ethyl acetate, sodium hypochlorite, toluene, or
phenol.
Extreme heat such as that generated by cigarettes or portable heaters can damage Vikrell surfaces;
do not use such items near your Vikrell unit.
1016756-5-E
(Bath and Shower only), Scrub Free
®
, Glass Plus , or Fantastik
® ®
(Bath and Shower only), Scrub Free
®
, Glass Plus , or Fantastik
® ®
Mildew Stain Remover, Mr.
®
All Purpose.
®
Mildew Stain Remover, Mr.
®
All Purpose. You can also use an
®
2
All
®
All
®
Kohler Co.