Tabla de contenido
Publicidad
Accessing the Configuration Interface
Access the EdgePower Configuration Interface to monitor
status and power consumption, or to configure 24V Passive
PoE and network settings.
Note:
The EdgePower is set to DHCP by default with a
fallback IP address of 192.168.1.20.
1. Launch your web browser. Type the appropriate IP address
in the address field. Press enter (PC) or return (Mac).
2. The login screen will appear. Enter ubnt in the Username
and Password fields. Click Login.
The EdgePower Configuration Interface will appear.
Customize additional settings as needed. For 24V Passive PoE
configuration, refer to the Configuring PoE Settings section.
You can also manage your device using UNMS, which lets you
configure, monitor, upgrade, and back up your devices using a
single application. Get started at www.unms.com
https://192.168.1.20
Publicidad
Tabla de contenido
